Filter By:
- BMX (7)
- Bottom Brackets (13)
- Brakes/Levers/Pads (36)
- Cables (19)
- Cassettes/Freewheels (19)
- Chainrings (9)
- Chains (17)
- Cranksets (13)
- Show More Categories
- Derailleurs (11)
- Handlebar Grips/Tape (22)
- Handlebars (4)
- Headsets (10)
- Pedals (19)
- Saddles (10)
- Seatposts (5)
- Shift/Brake Combinations (2)
- Shifters (9)
- Stems (5)
- Tires/Tubes (73)
- Wheels (26)
- Other (80)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts
Chris King bottom bracket Fit Kits for DUB cranks are used with Chris King bottom brackets to ensure that cranks mate perfectly with bearings, extend product life, and reduce the potential for noise. Fit Kits will also allow you to use one bottom bracket with a wide array of cranks, if you happen to change you cranks in the future.
- Thread: BC 1.37 x 24T
- Caged bearing 1/4" x 9
- Fits most square taper cotterless BB axles
- Spindle Type: SQR JIS
- Cup Material: Steel
Sunlite's Street S-7 Tire is an urban tire with a raised center rib for reduced rolling resistance.
- Size: 20 x 1-3/4 S-7
- ISO: 419
- Bead: Wire
- PSI: 50
- Weight: 470g
* not interchangeable with tires labeled "20 x 1.75"
$1.80 - $7.35
Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels.
- 14mm x 1mm (1411-AN) sold in pairs
- All others sold individually
$2.25
- Includes everything needed to mount hex nut style (non-recessed) caliper brakes
- Model: Front
$3.00
Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further.
- M4 x 24mm screw for that extra little push
$3.50 - $42.00
Stan’s NoTubes Sealant is a thin, low-viscosity liquid that coats the tire interior and seals punctures quickly. Two ounces of Stan's in a tubeless tire can repair punctures up to 1/4" to keep you rolling. Stan's Tire Sealant is formulated to stay liquid in tires for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart can convert up to 16 tires.
- Suitable for use in tubeless tires and standard tubes
- Designed to seal punctures up to 1/4"
- Stable down to -30 degrees Fahrenheit
- Non-hazardous, non-corrosive, non-toxic
- Contains natural latex
$3.99
Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.
$3.99
Stan's No Tubes' Presta Removable Valve Core is a replacement valve core for Stan's No Tubes Presta valve stems and Presta valve equipped rim strips.
$4.00
Eyelet Bushings for repair and maintenance of Rockshox rear shocks.
$4.50
Brass hose insert for Hope hydraulic disc brakes.
$4.98
Need a Shift Cable Fixing Bolt Unit for your Alfine S7000/S700 hub? Here it is. Now, get that bike back on the road!
$4.99 - $12.99
Jagwire's Sport Slick Stainless Shift Cable is a high-quality shift cable made of stainless steel for excellent shifting performance, corrosion resistance and durability. It also comes in lengths to fit single and tandem bicycles.
$4.99
- Model: Derailleur Bolt & Nut
- Compatibility: Mounts rear bracket to frame
$4.99 - $5.99
- Oversize 10mm
- Fits new style MTB & BMX levers
- Aluminum construction
$5.49 - $14.99
Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables.
- Slick cables are die-extruded for smooth operation
- Pre-stretched
- SRAM/Shimano mountain compatible cable end
- Stainless steel construction resists corrosion
- Single end cable features weld-cut for easy installation
$5.95 - $23.95
- Shim adds support to Presta stem used in a Schrader rim
$5.97 - $7.99
- Anodized alloy construction
- Fits standard Schrader valves
$5.97
- Steel cable noodle with alloy end caps
- Includes plastic liner
$5.99
• Compatible with most side pull and center pull brakes
• All weather compound
$6.00
KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs.
- Compatible with KMC and Shimano 10-speed chains
- Includes 2 pairs
$6.18 - $11.98
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity
$6.79 - $19.99
- Butyl rubber
- Removable valve core
- Schrader valve
- Wall thickness: 0.9mm
$6.95 - $18.99
The Dura Type insert pad was originally developed as an aftermarket upgrade for high end Shimano brake systems. The Kool-Stop Dura pads are the same spec as Shimano pads and fit Shimano, SRAM, TRP and Tektro holders with a set screw.
Compounds:
- Black: Kool-Stop's standard compound which is great for all weather conditions, but designed for dry condition riding.
- Ceramic: This compound was designed for ceramic coated rims and is great in all weather conditions.
- Salmon: Kool-Stop's most famous Salmon compound is also one of the most aggressive compounds for extreme all weather conditions especially in the wet, but still superb in the dry.
- Carbon: Kool-Stop's original carbon compound which works great for most carbon wheels but will wear quicker on fast steep descents.
- Dual: A fusion of Kool-Stop's two finest compounds which will give superb braking in all weather conditions. This combination produces a more controlled smooth stop!
Features:
- Patented Plow Tip
- Water Grooves
- Rim Friendly Compounds
- Fits 55mm length holders
$6.95 - $10.98
Replacement inserts for Shimano cartridge v-brake pads
- Black: standard compound designed for dry condition riding
- Red: semi-aggressive compound for good performance
- Salmon: aggressive compound for extreme weather conditions
- Green: designed for ceramic coated rims
- Dual: combination of Salmon and Black compounds for more controlled, smoother stopping
$6.98 - $15.99
- Replacement front cable hanger
- Aluminum construction
$6.99 - $9.00
Dimension Steel Cogs are splined for BMX and singlespeed hub compatibility.
- Steel with chrome finish
- Cogs are splined for Shimano BMX and singlespeed hub compatibility
- Compatible with 1/2-inch and 1/8-inch chains
$6.99 - $21.99
Your tubeless wheels will benefit from the use of Orange Seal Tubeless Tire Sealant. It is proven to seal large punctures up to 1/4-inch and perform under varying temperatures and altitudes. Orange Seal Tubeless Tire Sealant is compatible with most bike tire systems and is eco-friendly.
$7.20
- Replacement pins for 9-speed Shimano chains
- Compatible with CN-7700/HG92 chains
- 3 replacement pins per pack
$7.29 - $24.89
- Valve Type: Schrader
- Valve Core: Removable
- Butyl rubber
- Wall Thickness: 0.9mm
$7.39 - $37.49
- Valve type: Schrader
- Valve core: Removable
- Valve stem: Smooth
- Butyl rubber
- Wall thickness: 0.9mm
$7.49
- Missing links to make chain installation, maintenance and reparation easier
- Card of 2
$7.97 - $11.99
Chrome plated heat treated bolt
- Forged steel conical wedge
- For 1-inch steer tubes
$8.00
Hose Kits, Barbs and Strain Relief for Servicing Reverb Lines.
$8.00
- Replacement chain pins for Shimano 11-speed chains
- Compatible with CN7900/7801 chains
- 3 pins per pack
$8.39 - $16.99
- Valve: Presta
- Valve core: Removable
- Butyl rubber
- Wall thickness: 0.9mm
$8.39 - $12.99
- Valve type: Schrader
- Valve core: Removable
- Butyl rubber
- Wall thickness: 0.9mm
$8.97
- Missing links to make chain installation, maintenance and reparation easier
- Card of 2
$8.99 - $16.99
- ISO Diameter: 406 / 20" BMX
- Wall Thickness: 0.9mm
- Tube Compound: Butyl
- Valve: Standard Schrader
- Shaft Type: Smooth
- Valve Core: Removable
$8.99 - $10.00
- Size: 26 x 1.0 – 1.25
- ISO Diameter: 559 / 26" mtn
- ISO Width: 25mm, 26mm, 27mm, 28mm, 29mm, 30mm, 31mm
- Tube Compound: Butyl
- Valve: Presta
- Valve Core: Removable
- Valve Shaft: Threaded
- Weight: 96g
$8.99 - $12.99
- ISO Diameter: 559 / 26" mtn
- Tube Compound: Butyl
- Valve: Standard Schrader
- Valve Core: Removable
- Valve Shaft: Smooth
- Weight: 102g (1-1.25), 165g (1.5-1.75), 174g (1.9-2.125), 198g (2.1-2.3), 281g (2.4-2.75)
$8.99 - $12.99
- Size: 650c x 18 – 23
- ISO Diameter: 571 / 650c
- ISO Width: 18mm, 19mm, 20mm, 21mm, 22mm, 23mm
- Tube Compound: Butyl
- Valve: Presta
- Valve Core: Removable
- Valve Shaft: Threaded
- Weight: 89-92g
$8.99 - $13.50
- Size: 700c x 23 – 25
- ISO Diameter: 622 / road / 29"
- ISO Width: 23mm, 24mm, 25mm
- Tube Compound: Butyl
- Valve: Presta
- Valve Core: Removable
- Valve Shaft: Threaded
- Weight: 125g (32mm), 126g (48 & 60mm), 128g (80mm)
Page 1 of 7
Next page