Parts

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Avid's Front 180mm/Rear 160mm Post Bracket Hardware Kithas everything you need to mount a front 180mm or a rear 160mm rotor (sold separately) to your bike.

Grenade style Schrader Valve caps

- Upper cables measured from brake lever to detangler top plate - Lower cables are measured from detangler to cable stop/London mod - Includes adjusters compatible with most detangler styles - Use: Upper - Length: 11 - 12.5" - Diameter: 1.5mm

- PIVOTAL Compatible - Ultra-light 6061 forged alloy construction - Reinforced wall construction - Setback: 0mm

- Chromoly construction - Classic BMX Lay-back design - Material: Cro-Mo

- CNC machined 6061-T6 alloy - Fits 1-piece and 3-piece BMX cranks - 23.8mm hole for 1-piece cranks with shims for 19/22mm 3-piece cranks included - Hard anodized coating - Unique, 1/8" quiet drive technology - Mount Compatibility: 1-piece/3-piece - Chain Compatibility: 1/2" x 1/8"

- Forged alloy construction - Double bolt centering design - Oversize 6mm hex bolts

- Compatible with 1-piece BMX cranks - CNC machined 6061-T6 alloy construction - Teeth: 25T - Material: Alloy - Chain Compatibility: 1/2x 1/8-inch - Tooth Type: Standard

- Super hardened nylon construction - 40mm diameter, 100mm length - Special insert fits 3/8" or 14mm axles - 90g (pair)

The Vault uses an all-condition tread pattern suitable for street, park and dirt riding. With a textured surface and slightly raised shoulder knobs, the Vault rolls fast without giving up traction. - Textured surface and slightly raised shoulder knobs for fast rolling and cornering traction

The Rock Hawk is designed as an all-condition trail tire that has an aggressive tread with widely spaced lugs. - Ramped center knobs reduce rolling resistance - Durable 27 TPI casing

The Patrol is an all-condition XC trail tire that excels on hardpacked to loose conditions. - Medium-height ramped center knobs roll fast and provide climbing traction - Aggressive shoulder lugs deliver secure traction in corners - Durable 27 TPI casing

The Rock Hawk is designed as an all-condition trail tire that has an aggressive tread with widely spaced lugs. - Ramped center knobs reduce rolling resistance - Durable 27 TPI casing

Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.

Replacement top subassemblies are compatible across Cane Creek 110-, 40-, and 10-Series headsets with the same SHIS values. - Bearings not included - Stack height: 9mm

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

This is the Top Cover for the Cane Creek 40 Series ZeroStack headset. Please contact us if you have any questions about which parts are correct for your headset.

This is the Bottom for the Cane Creek 40 Series ZeroStack headset. Please contact us if you have any questions about which parts are correct for your headset.

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: ZS49/28.6/H8/K • Top Type: ZS - ZeroStack • Top Head Tube Inside Dia.: 49.61mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 8mm • Top Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 57g

This is the Bottom External Cup for the Cane Creek 40 Series headset. Please contact us if you have any questions about which parts are correct for your headset.

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.

Chris King bottom bracket Fit Kits for DUB cranks are used with Chris King bottom brackets to ensure that cranks mate perfectly with bearings, extend product life, and reduce the potential for noise. Fit Kits will also allow you to use one bottom bracket with a wide array of cranks, if you happen to change you cranks in the future.

- Size: 10.5" long x 10.5" wide - Padding: Multi-stage foam - Anatomic relief design - Suspension: Coil spring - Use: Cruiser - Cover material: Emerald WR

Completely renewed, sporting a dynamic tread pattern design. Matches with a race bike, as well as a classic city road bike. Available in a wide range of dimensions and colors. PureGrip Compound Based on activated silica compounds, this technology was originally intended as an performance level compound, but after intensive development at our Korbach Research and Development Department Facility, an advanced new compound with outstanding grip and cross-country properties was developed. This new rubber mix, given the self explanatory name "PureGrip", is ranked just behind our BlackChili Compound and is being used in our performance products both in the road and mountain bike sectors. Whilst providing great grip, it is also long lasting and highly durable – both characteristics of Continental tires, which are exclusively manufactured in the factory in Hefei (Asia). Suitable for E-Bikes For our E-Bike tyre we fall back on over 100 years' experience with moped and motorcycle tires. All of our city/trekking tires are rated to a standard speed of at least 25 km/h. Those tires marked e50 are also certified for S-Pedelecs. With their high quality structure, puncture protection is high and the rolling resistance is low offering protection from premature wear brought about by the additional driving force.

Continental's Gatorskin combines 3 flat-protection technologies into one fast-riding, high-mileage racing and training tire. It features a super-fine 180 thread-per-inch casing, a bead-to-bead layer of DuraSkin, and is finished with a Kevlar-reinforced top layer. The result is a light tire that rolls and corners with the best of them while providing flat protection second to none. - Weight: 290/310/360/365/390 grams (23c/25c/28c/32c/27 x 1 1/4) - PolyX puncture protection - DuraSkin sidewall protection

The Grand Prix 5000 is the best all-rounder in the field, brought to a whole new performance level. Ride faster, more comfortably, and with increased puncture protection. Its Active Comfort Technology absorbs vibrations and smooths your ride. Lazer Grip technology, designed to make you one with the road, features a lasered micro profile structure that expands over the tire’s shoulder and provides outstanding cornering. The Vectran Breaker is lighter, more flexible and protects more effectively against cuts than comparable nylon. With incredible tear resistance at a very low weight, it possesses exactly the right properties to be a premium puncture protection insert, while not adversely affecting rolling resistance. The Grand Prix 5000—made to make you better. With Continental's unique and legendary BlackChili tread compound, produced only in Germany, they have revolutionized the sport of cycling. This compound answers the eternal question of the best balance of grip and rolling resistance for cycling. Regular test wins confirm the measurable and noticeable advantages for cyclists, established in both the lab and on the road. The latest polymers, as well as specially developed carbon black particles and filler materials, guarantee ultimate performance.

Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability. - SPD compatibility - Weight (pair): 30g - Float: 6 degrees - Release angle: 15 or 20 degrees